EDGE-LIT LED

MITRONIC

Made in Poland
36 years of experience

Contact

displays@textil-lightboxes.eu

Tel. +48 (22) 649 63 71

VAT TAX

Business customers
WITHOUT VAT Tax
Private customers
WITH VAT Tax

SHIPMENT IN EUROPE

DHL▪ UPS ▪ TNT ▪
FedEx ▪ GLS ▪
DPD ▪
RABEN ▪ HELLMANN

Edge lit (side lighting)

The LED light modules are attached to the side edges of the light box. For side lighting, the light beam is flat (light blade). The entire surface of the fabric is illuminated from the side.
The edge lighting is used with the following thicknesses: 66 mm, 86 mm, 100 mm, 120 mm and 150 mm.

Side lighting (LED edge irradiation modules, LED frame modules) The LED light modules are attached to the side edges of the light box.
Side lighting (LED edge irradiation modules, LED frame modules) The LED light modules are attached to the side edges of the light box.
Side lighting (LED edge irradiation modules, LED frame modules) The LED light modules are attached to the side edges of the light box.
Side lighting (LED edge irradiation modules, LED frame modules) The LED light modules are attached to the side edges of the light box.

The LED frame modules are mounted:

1) On one side of the light box
2) On the two shorter sides of the light box
3) On the two longer sides of the light box
4) On all four sides of the light box

This depends on the size of the light box and the customer’s expectations regarding the illuminance.

Side lighting (LED edge irradiation modules, LED frame modules) The LED light modules are attached to the side edges of the light box.

The frame lighting is cheaper for three reasons:

1) You do not need a back wall for the lightbox
2) The time-consuming installation of the LED modules on the back wall is eliminated,
3) The transport costs are lower. We often send the light boxes disassembled and the fabric with the graphics is rolled up. The dimensions of the delivery are therefore smaller and thus also the transport costs. A PCV or Dibond rear wall cannot be rolled up. Thus, the delivery is larger and the transport costs higher.

Backlight

Backlighting is more expensive than the side lighting in most cases. One uses this kind if:

a) A particularly uniform illumination of the advertising graphic is required
b) No side lighting is possible

The light boxes with a thickness of 16 – 46 mm are in most cases not illuminated. On customer request it is possible to manufacture a special lighting. This can be achieved with the help of special LGP plates (Light Guide Plate)

Backlight
Led strip

 

 

 

 

 

 

 

A)  LED bars

Led curtain
Led curtain

B) LED Curtains

B) LED Curtains

Light Guide Plate

 

 

 

 

 

 

C) LGP Light Guide Plates

.

Fabrics for Textile Light-Boxes

Fabric printing.

We do not just make printed fabrics for our textile-boxes. We also sell these as a separate product.

We print the fabric sheets for exhibition and shop fitting using modern technologies: UV, SOLVENT or LATEX.

We use high quality fabrics, for example:

a) DYNAJET Weight 135 g / m2, material thickness 0.13 mm. Max. printing width 315 cm. This material can be applied to light boxes with or without lighting (here we use a slightly different printing technology).

b) COALA TEXTILE BACKLIT CITY Weight 180 g / m2. Max. printing width 315 cm. This material can be applied to light boxes with or without lighting (here we use a slightly different printing technology).

c) SAMBA and other fabric types are used on customer request (max width up to 5 m).

The fabric has a silicone or PVC strip sewn on all four edges. This is used for quick assembly of the fabric on the aluminium frame. The silicon strip is pressed into the slots in the aluminium frame. You do not need any tools for that. The sew line is hidden in the frame recessed groove, providing a sleek finished look. We use silicon strips with the dimensions 14 x 3 mm, 15 x 3 mm, 13 x 4 mm or others, according to customer requirements.

SPAN TOWELS TEXTILDRUCK
SPAN TOWELS TEXTILDRUCK
The fabric has a silicone or PVC tape sewn on all four edges. This is used for quick assembly of the fabric on the aluminum frame.
The piping is pressed into the slots in the aluminum frame. You do not need any tools for that.

STOFFDRUCK ● DIGITALDTRUCK ● TEXTILDRUCK ● SPANNTUCHPRINT ● SPANNTUCH-DRUCK ●  DRUCKTEXTILIEN ● TEXTILSPANNTÜCHER ● SPANNTÜCH ● SPANNTÜCHER GEDRUCKT ● FLACHKEDER FÜR KEDERSCHIENEN ● SILIKONKEDER ● GUMILIPPE● SPANNTUCH-PRINT ● DRUCKTEXTILIEN FÜR SPANNTÜCHER

Light Colour

Most commonly we use the light colour 6000K to 6500K. This light colour is mainly used in advertising technology (the advertising graphics are best visible).

Also possible is the light colour 4000K , 5500K or 3000K – a very warm light.

Dimming and adjusting light colour

Many light sources are not suitable for dimming. On customer request we use special lighting types, where you can adjust the light brightness. It is also possible to adjust the light colour. On a separate order, we also supply a devices for dimming and for adjusting the light colour (by cable or by remote control)

The back wall of the light box

In the standard version we do not supply a back wall to the light boxes (on customer’s request we can supply such a wall from PCV or Dibond). However, the rear panel is always supplied when a backlighting is used.

With one-sided light boxes with side lighting, you can save costs by doing without the back wall. The price difference is apparent for two reasons.

1) The costs for the execution of the back wall (PCV or Dibond) are eliminated

2) The transport costs are lower. When the customer orders the light box for self-assembly, we roll the fabric together with the advertising graphic and place the aluminium profiles parallel to each other. This reduces the size and thus the transport costs. The back wall cannot be rolled up or folded up and thus these costs increase.

For light boxes with a thickness of 46mm, 120mm and 150mm a compromise solution is possible. Here we can deliver the back wall from a rollable material. The fabric is white at the front (for light reflection) and black at the back. You put it on the lightbox as well as the front advertising graphics (based on the sewn-in silicone rubber cord).

Most customers do without the back wall. You make these yourself, or hang the lightbox directly on a white wall.

MEAN WELL LED – DRIVERS

We offer different types of LED Drivers (LED power supply).

We mainly use power supplies from the company Mean Well. It is one of the best manufacturers on the market. The power adapter can be mounted in Lightbox or outside.

  1. A) Power supply in the Lightbox. In the Lightbox a voltage of 230V AC has to be supplied. The cable has a length L1 specified by the customer. It can be supplied with a plug or without.
  2. B) Power supply outside the Light Box. To the Light Box a voltage of 12V DC or 24V DC is connected. The power supply is mounted on the cable or in the plug.

On customer request we can attach an on-off switch to the cable or to the housing of the light box.

We offer different types of LED Drivers (LED power supply). We mainly use power supplies from the company Mean Well. It is one of the best manufacturers on the market.

 

MEAN WELL ● LED – NETZTEILEN ● LED – TREIBERN ● LED – DRIVER ● LED – STROMVERSORGUNG ● LED – ADAPTER  ● LED  – TRAFO ● LED  – POWER SUPPLY ● LED – KONVERTER ● LED – NETZTEIL ● LED – TREIBER ● LED – DRIVERS ● LED-CONVERTIDOR ● LED-CONDUCTORES  ●  CONDUCTEURS MENÉS  ● CONVERTISSEUR LED ● MeanWell 

Assembly for transport

The Light Boxes are delivered disassembled (for self-assembly). This reduces the price, the dimensions of the delivery and the transport costs. At the request of the customer, we can also deliver the ready-assembled Lightbox for immediate use.

Delivery Time

The production of the Light Boxes takes about 6 working days

TRANSPORT

The Light Boxes for our customers in Europe are sent by DHL, DPD, GLS, TNT, FedEx or UPS. The transport time is about 2 working days. For large orders we cooperate with the companies Raben or Hellmann Worldwide Logistics.

VAT Tax 0%

For customers from the EU, we do not charge VAT. Condition is the possession of an activated VAT number (USt.-Ident). Whether this is activated can be checked on the following website http://ec.europa.eu/taxation_customs/vies/?locale=en

In all other cases we charge a 23% VAT.  United Kindom after possible Brexit – VAT 23%

Fair Counters and 3D textile constructions

We also manufacture reusable trade fair counters. These are made in similar technology as the textile light boxes. The graphic is printed on a textile fabric. You can exchange them several times without tools. For transport, you can fold the aluminium structure and roll up the fabric with the graphic. We manufacture various three-dimensional textile constructions (3D). For example, advertising cubes, as in the photo:

Trade shows Textile and 3D textile constructions
Trade shows Textile and 3D textile constructions
Trade shows Textile and 3D textile constructions

Presentation Walls

  • Fabric walls
  • Textile walls

    Presentation walls we manufacture in the same technology as the  Textile Light Boxes.  Fabric Walls are ideal for large spaces. The textile walls are well suited for trade fairs, commercial spaces, hotels, health centers etc.

       In case, if the presentation walls are too big, we divide the aluminium profiles into shorter sections. During assembly, these are connected by means of special fasteners.

      We supply fabrics with printed graphics, which can be mounted quickly and without tools. The assembly takes place with the help of the sewn-in silicone rubber cord, which is pressed into the aluminium frame. The graphics can thus be exchanged several times and this reduces the advertising costs. For more information on fabrics, printing and other technical details, please press on ​Textile Light Box.

LIGHT BOX WITH LED AND ALUMINUM TEXTILE CLAMP FRAME Textile light boxes are among the most effective means of advertising used primarily in shops, trade galleries, trade fairs, etc. Our fabric light boxes are produced in Eastern Poland.

FRAMELESSRAHMEN ● LED SPANNRAHMEN ● LED TEXTILSPANNRAHMEN ● LED BELEUCHTET ● LED RÜCKBELEUCHTUNG ● LADENBAU ● MESSEBAU ● HINTERBELEUCHT ● LED PROMOTIONTHEKE ● CADRES-TEXTILES ● TEXTIL-LIGHTBOXES ● TEXTIL-DISPLAYS ●  FABRIC-DISPLAYS ● TEXTIL-LEUCHTKASTEN ● FRAMELESS-RAHMEN  ●TEXTIL-SPANNRAHMEN  ● TEXTIL-LIGHTBOX ● TEXTILE-DISPLAYS  ● TEXTILE-LIGHTBOX ●  CAJA DE LUZ TEXTIL ● TEXTILRAHMEN ● FABRIC-DISPLAYS ● FABRIC-LIGHTBOX ● TEXTIL-RAHMEN ● FABRIC LIGHT-BOX ● HINTERLEUCHTEN ●  BACKLIGHTING ● ZARGENLEUCHTEN ● TEXTIL-LEUCHTRAHMEN ● ZARGEN LIGHTING ● KANTENLEUCHTEN ● BACKLIGHTEN ●  TEXTIL KÄSTEN ● LED LEUCHTKÄSTEN ● LEUCHTKASTEN BEDRUCKEN ● LED KASTEN ● BEDRUCKSTOFF

MITRONIC

Made in Poland
36 years of experience

Contact

displays@textil-lightboxes.eu

Tel. +48 (22) 649 63 71

VAT TAX

Business customers
WITHOUT VAT Tax
Private customers
WITH VAT Tax

SHIPMENT IN EUROPE

DHL▪ UPS ▪ TNT ▪
FedEx ▪ GLS ▪
DPD ▪
RABEN ▪ HELLMANN